Customized Tableware Glass Production Line Clear Stemware Glass for Domestic Glass

Customized Tableware Glass Production Line Clear Stemware Glass for Domestic Glass

1. Brief introduction

Glass tableware is a type of tableware made from glass. It typically includes plates, glasses, mugs, and other items used for eating and drinking. Glass tableware is made from a variety of materials, including soda-lime glass, lead crystal, and borosilicate glass. Glass tableware is typically transparent, allowing for a clear view of the food and drink being served. It is also heat-resistant, making it suitable for hot and cold dishes.

Glass tableware is also easy to clean and can be reused, making it an environmentally friendly option. glassware, any decorative article made of glass, often designed for everyday use. From very early times glass has been used for various kinds of vessels, and in all countries where the industry has been developed glass has been produced in a great variety of forms and kinds of decoration, much of it of great beauty. For the composition and properties of glass and the manufacture of various glass products such as glass containers, window glass, plate glass, optical glass, and glass fibres, see industrial glass.

Tableware glass can be made of soda-lime glass, borosilicate glass, lead crystal glass, opal glass and other different types of glass. Tableware glass has a wide range of products such as glass tumblers, glass cups, glass bowls, glass dishes, stemware glass, furnishing glass, etc., which can be used for various food serving and dining, daily necessities and furnishings, etc.

Products

2. Advantage

• Increase the strength and thermal impacting property of the glass product.
• Increase the decoration apperance of the glass product.

3. The brief introduction of opal glass material

Stable chemical components in the raw materials are very important, especially the content of fluor and sodium fluosilicated, which will affect the opacifying effect.

To produce high quality product of opal glass, a high quality of silica sand shall be reqruied. The main materials to produce opal glass are below,

Physicochemical changes in each glass melting stage:

1. Silicate forming

In this stage, the components of batched materials will produce a physicochemical solid phase reaction during heating process, in which the gaseous products will be released from the batched materials and produce a new opacity sinter ultimately, which is formed by silicate and SiO2.

2. Glass liquid forming

In this stage, the sinter will be melting and the silicate and SiO2 in sinter will change to flint glass liquid with a plenty of bubbles. However, its chemical components and character are not even.

3. Clearing

The glass liquid is continuously heated, and its viscosity is reduced with plenty of gaseous sundries released, which should eliminate the visible bubbles with the pool of liquid.

4. Homogenization

The glass liquid is kept at high temperature for a long time, the ripple eliminates by diffused function and homogenizes as a whole. The temperature of homogenization can be lower than the clearing stage.

4. Main equipment of forming device

• Gob Feeder / Serve Gob Feeder

Shear angle:adjustable between RH30°- LH 90°
Available for S.G, D.G and T.G.

• Press machine

Press machine is a special type of industrial machinery and equipment in glass manufacture industry and glass mechanical industry, which is called as glassware press forming machine. It belongs to glass forming section in the process flow of glass production.

• Transfer ware

Transfer ware is designed for conveying the glass product from I.S. machine or press machine to cross conveyor in front of the annealing lehr quickly and stably, which is especially applicable to high-speed glass production line.

• Cross Conveyor

Cross conveyor is installed in front of annealing lehr for cross conveying the glass product and works with stacker to push them into annealing lehr.

• Stacker

Stacker is used for pushing the glass product from the cross conveyor into annealing lehr. Pushing speed is adjusted by inverter, quantity of pushing numbers is controlled by digital counters.

• Annealing lehr

Annealing lehr can be continuous annealing of tableware, bottles, cans, and other glass products.

• Packing devices

Different kinds of packing devices could meet different packing types of different kinds of domestic glass products.

FAQ

Q: Who we are?

A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.

Q: Can you customize the products?

A: Yes, we have an experienced professional team ready to make design according to the requirement of customers.

Q: Do you offer installation on site overseas?

A:Yes, we can provide our engineer to supervise the installation work on site or provide the the whole installation team on site to finish the project.

Q: Confidential protection provide?

A: Strict drawing management system eliminates the risk of the leakage and protects your interests.